About Local Administrative Procedures - Avaya one-X 9600 Series Installation And Maintenance Manual

About Local Administrative Procedures

Craft procedures allow you to customize the 9600 Series IP Telephone installation for your
specific operating environment. This section provides a description of each local administrative
option covered in this guide, with references to the pages on which the option appears.
Note:
Due to its smaller display size, the 9610 IP Telephone does not present the
Note:
procedures exactly as shown in this chapter. The 9610 does display essential
information like the other 9600 Series IP Telephones, but that information may be
formatted differently.
Unless otherwise prohibited using administration, a user can view but not change
most of the parameters associated with Craft procedures. For more information,
see the applicable users guide(s).
Shown As
(this value
always
displays in
English)
8021X
ADDR
AGC
CHADDR
CLEAR
CONT
DEBUG
GROUP
Craft Procedure Purpose
Set 802.1X operational mode
Address information
programming
Enable/disable Automatic Gain
Control
Set the DHCP chaddr field
value
Clear all values to factory
defaults
Adjust the contrast of any
SBM24 Button Modules and
any 9600 Series IP Telephones
other than the 9620C, 9640, or
9650C
Enable/disable Debug Mode
Set the Group Identifier
About Local Administrative Procedures
See
Set the 802.1X Operational Mode
page 37.
Static Addressing Installation
page 38.
Disable/Enable Automatic Gain
Control on page 40.
Manually Setting the DHCP Client
Hardware Address on page 41.
Clear Procedure on page 41.
Adjusting Contrast on SBM24 Button
Modules and Non-Color IP
Telephones on page 42.
Disable/Enable Debug Mode
page 43.
Group Identifier on page 43.
Issue 6 February 2009
on
on
on
1 of 2
35