Avaya one-X 9600 Series Installation And Maintenance Manual page 15

Verify These Network Requirements (continued)
3. The following circuit packs are installed on the switch:
TN2602 or TN2302IP Media Processor circuit pack. Sites with a TN2302 IP Media
Processor circuit pack are strongly encouraged to install a TN2602 circuit pack to
benefit from increased capacity.
TN799B, C, or D Control-LAN (C-LAN) circuit pack.
!
Important:
IP telephone firmware Release 1.0 or greater requires TN799C V3 or
Important:
greater C-LAN circuit pack(s). For more information, see the Communication
Manager Software and Firmware Compatibility Matrix on the Avaya support
Web site http://www.avaya.com/support.
4. The Avaya Media Server is configured correctly, as described in the Avaya one-X™
Deskphone Edition for 9600 Series IP Telephones Administrator Guide and Avaya
Communication Manager documentation. Both documents are available at:
http://www.avaya.com/support.
5. The DHCP server and application are administered as described in the Avaya one-X™
Deskphone Edition for 9600 Series IP Telephones Administrator Guide.
6. The HTTP server and application are administered as described in the Avaya one-X™
Deskphone Edition for 9600 Series IP Telephones Administrator Guide.
7. The upgrade script and application files from the Avaya Support Web site,
http://www.avaya.com/support, are loaded correctly on the HTTP/HTTPS server.
8. If applicable, the DNS server is administered as described in the Avaya one-X™ Deskphone
Edition for 9600 Series IP Telephones Administrator Guide.
9. If applicable, the WML server is administered as described in the Avaya one-X™
Deskphone Edition for 9600 Series IP Telephones Administrator Guide.
Notes:
- Any or all of the server applications mentioned in items 5.-9. can be co-resident on the same
hardware, subject to the specific restrictions of each individual application.
- See the Avaya one-X™ Deskphone Edition for 9600 Series IP Telephones Administrator Guide
for more information about:
administering other network equipment,
administering applications like firewalls, and
information about topics like port utilization.
Note:
Requirements to Verify for Each IP Telephone
10. You have an extension number and an Avaya Communication Manager security code
(password) for each applicable IP telephone. If your call server supports unnamed
registration, and the telephone settings file allows unnamed registration, you do not need
to provide an extension or password for the telephone. However, if you do not provide an
extension or password, the telephone will have very limited telephone functionality.
(For information, see
11. A Category 5e LAN jack is available at each telephone site.
12. Electrical power may be provided to each telephone by a Telephone Power Module (which
must be ordered separately). If the LAN will supply IEEE-standard power (Power over
Ethernet) to the telephone, no power module is required.
13. 1 Category 5e modular line cord is available for the connection between the IP telephone
and the PC, if applicable.
Unnamed Registration on page 28.)
Issue 6 February 2009
Pre-Installation Checklist
15