Entering Data For Administrative Options; About Local Administrative Procedures - Avaya one-X Installation And Maintenance Manual

Entering Data for Administrative Options

This section applies to all 9600 Series SIP IP Telephones and describes how to enter data for
administrative options.
1. The first application line on any screen is automatically highlighted (selected) when the
telephone displays the screen. To select the item on that line, press the appropriate softkey
at the bottom of the screen, for example, Change or Save, or the OK button. To select a
different line, use the down or up navigation arrows to change the line focus. When the
desired line is highlighted, then press a softkey or OK to select that line.
2. Attempts to enter invalid data are rejected and the telephone emits an error beep.
3. If you enter a numeric digit that causes the IP Address or subnet mask value to exceed 255,
or any value to exceed its maximum field value, an error beep tone sounds, the digit is
ignored, and the cursor does not move forward.
4. If you enter a numeric digit for a value or for an IP Address or subnet mask field after
entering only a zero, the new digit replaces the zero.
5. When you press the Bksp softkey to backspace, the most recently entered digit or period is
erased from the display. The cursor remains in the erased character's former position.
6. The More softkey provides data entry options like symbols, all capital letters for text,
numerals, etc.
7. Pressing Back or Exit exits the local procedures. If any changes were made using the
ADDR procedure or if the Crafts Entry screen was invoked during startup, the telephone
immediately resets. If no ADDR changes were made or if the local procedures were invoked
post-startup, the telephone redisplays the screen (or other display) that was effective when
the craft options was invoked.
Note:
If PROCSTAT has been administered to 1, you will not be able to invoke any
Note:
administrative options other than V I E W.

About Local Administrative Procedures

Craft procedures allow you to customize the 9600 Series IP Telephone installation for your
specific operating environment on a telephone-by-telephone basis. This section provides a
description of each local administrative option covered in this guide, with references to the
pages on which the option appears.
Entering Data for Administrative Options
Issue 1 May 2007 27