Directly Faxing, Performing An Ip Relay Operation, Or Forwarding Received Documents (Mode 352) - Konica Minolta bizhub 362 User Manual

8
Specifying whether transmission source information is added when
directly faxing, performing an IP relay operation, or forwarding received
documents (mode 352)
Specify how transmission source information is added when directly faxing,
performing an IP relay operation, or forwarding received documents.
Settings at time of purchase
Bit
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were
selected.
Bit
7
6
5
4
3, 2, 1, 0
8-20
7 6 5 4 3 2 1 0
1 1 0 1 0 0 0 0 (HEX: D0)
Description
--------------------------
Specifies where trans-
mission source infor-
mation is added with
direct faxing and IP re-
lay operations.
Specifies whether or
not a transmission
source information is
added to received
documents that are
forwarded.
Specifies how trans-
mission source infor-
mation is added when
a received document
is forwarded.
--------------------------
Specifying management settings
Setting Description
1 *Do not change this bit
when specifying settings
for this function.
0 Outside of the document
1 Inside the document
0 Not added
1 Added
0 Outside of the document
1 Inside the document
0000 *Do not change these bits
when specifying setting for
this function.
Page Refer-
ence
----------
----------
----------
----------
----------
bizhub 362/282/222