Auto-Registering Your Phone Using Taps; Using Feature Buttons - Cisco 7960G User Manual

Auto-Registering Your Phone Using TAPS

Auto-Registering Your Phone Using TAPS
Step 1
Step 2
Step 3

Using Feature Buttons

Cisco IP Phone 7960G and 7940G User Guide
1-10
After your phone is installed and connected to the network, your system
administrator might ask you to auto-register your phone using TAPS (Tool for
Auto-Registered Phones Support). TAPS might be used either for a new phone or
to replace an existing phone.
Procedure
To register with TAPS, pick up the handset and enter the TAPS extension provided
by your system administrator.
Follow the voice prompts.
You might need to enter your entire extension, including the area code.
After your phone displays a confirmation message, hang up.
The phone restarts and displays your extension number.
Your Cisco IP Phone has four feature buttons:
Services button—Displays services on your phone's LCD screen. These are
•
services to which you have already subscribed using the Cisco CallManager
User Options web pages. Your system administrator determines the services
that are available to you. For more information, see the
and Services" section on page
Messages button—Provides access to your voice messaging system. For
•
more information, see the
page 7-1.
Settings button—Displays network settings on your phone's LCD screen,
•
plus options for adjusting your phone's ringer sound and LCD screen
contrast. For more information, see the
Data" section on page
page 5-2, and the
Chapter 1
6-3.
"Using Your Voice Messaging System" section on
"Accessing Network Configuration
10-3, the "Adjusting the Ringer Volume" section on
"Changing the LCD Screen Contrast" section on page
Introducing Your Cisco IP Phone
"Additional Features
OL-4637-01
5-4.