Using The Speaker - Cisco 7960G User Manual

Using the Handset, Speaker and Headset

Using the Speaker

Cisco IP Phone 7960G and 7940G User Guide
1-14
Figure 1-4 Using the Handset Rest
1
Step 1 Set the handset aside and use your thumb and finger to grasp and pull
out the square plastic tab in the handset rest.
Step 2 Rotate the tab 180 degrees.
Step 3
Slide the tab back into the handset rest with the extension protruding
from the top of the tab.
Replace the handset in the rest. The tab hooks into a slot in the handset
to ensure that the handset will not slip out of the rest.
You can use the speaker in conjunction with all of the features on your
Cisco IP Phone.
To place and answer calls using the speaker, press the Speaker button.
•
To switch from speaker to handset during a call, lift the handset.
•
Chapter 1
2 3
Introducing Your Cisco IP Phone
OL-4637-01