Cisco 7960G User Manual page 77

Chapter 5 Customizing Settings on Your Phone
To set the ring type for the default ring tone, use the Navigation button to
Step 3
highlight Default Ring and press the Select softkey.
Use the Navigation button to scroll through the list of ring types and press the
Step 4
Play softkey to hear the selected ring.
When you find the ring you want, press the Select softkey to select the
Step 5
corresponding check box.
Press the OK softkey to accept and save your ringer selection.
Step 6
If you have multiple lines, use the Navigation button to scroll through the list of
Step 7
your lines. When you find the line you want to configure, press the Select softkey.
Note
Use the Navigation button to scroll through the list of ring types and press the
Step 8
Play softkey to hear the selected ring type.
Step 9 When you find the ring you want, press the Select softkey to check the
corresponding check box.
Step 10 Press the OK softkey to accept and save your ringer selection.
To set the ring tone for your line to match the default ring tone, select the Default
softkey.
Press the Exit softkey to save all of your settings and to exit the Settings menu.
Step 11
OL-4637-01
You can use only six different ring tones on your phone. If you have more
than six lines, some of your lines must share a ring tone.
Personalizing the Ringer Sound
Cisco IP Phone 7960G and 7940G User Guide
5-3