Switch On Loading Media
Switch On
Procedure
Once the authorized technician has executed the set up of the machine the starting opera-
tions can be executed as follows:
1
2
3
4
Turn the General Switch on the position
"ON".
On the Display of the Table Commands Panel
will appear:
Push on the Power Switch to start the Print-
ing Unit
Push the Start Key. The related led will
switch on, wait until on the display will ap-
pear "SETUP SHEET"
Check that the Stop/Emergency Key is
armed
- If not go to point 5
- If armed, rearm it.
- Then push the Start key to start the ma-
chine.
2
29