Installing Dfu On The Host Pc - Datalogic Skorpio X3 User Manual

4
4.8.2

Installing DFU on the Host PC

Datalogic Firmware Utility (DFU) provides administrators with a field upgrade
mechanism. You must have Microsoft® ActiveSync (for Windows XP devices) or
Windows Mobile® Device Center (for Windows 7 and Vista devices) already loaded
and running on the host PC to use DFU. Refer to par. 4.7.1 for more information
about Windows Mobile® Device Center.
Prior to installing, you must remove any previous versions of DFU
installed on the host PC.
NOTE
To install the Datalogic Firmware Utility, complete the following steps on the PC:
1. Insert the CD ROM shipped with your device into the PC and click on the link
to install Datalogic Firmware Utility.
OR
Go to the Datalogic Mobile website and download the most current version of
the Datalogic Firmware Utility. Unzip the file, then double-click to run
DFU_Setup.exe.
Click OK to continue once you have removed previous versions of DFU.
2. The Welcome to DFU Setup Program screen opens.

Please exit all Windows applications before running this installer.

Click Next to continue the Setup.
3. Follow the onscreen instructions to complete the installation.
82
SKORPIO™ X3
1