Matrix 2 Of 5 - Datalogic Skorpio X3 User Manual

Matrix 2 of 5

Description
Code Parameter
Enables/ disables the Matrix
Enable
2 of 5 symbology.
Enables more aggressive
Enable
decoding algorithms to be
Aggressive
used in order to scan hard to
Decoding
read labels.
Requires the use of
Enable
checksum characters to
Checksum
verify a bar code.
Instructs the terminal to
include the checksum in the
Send Checksum
label transmission.
Minimum
Set the minimum label length
to be less than or equal to
Label
maximum label length.
Length
This feature specifies the
maximum allowable length of
a Matrix 2 of 5 label. The
Maximum
length includes check and
Label
data characters. Maximum
Length
Label Length should be
greater than or equal to
Minimum Label Length.
Sets the number of times a
Read
label must be read before it
Verification
is transmitted.
Specifies the symbology
identifier (if any) that is sent
by the decoder when
parameter Send Code ID
(Index 0025) is set to 3.
User ID
ASCII code zero (null) is
used to indicate that an
identifier is not to be sent for
the symbology.
Accept.
I.D.#
Input
Enter 1 for On and 0 for Off
0208 On or Off
0209 On or Off
020A On or Off
020B On or Off
0224 01 - 50
0225 01 - 50
0226 01 - 04
Any
single
0227 ASCII
character
(00 = Off)
Defaults
Off On Off
Off On Off
Off Off Off
Off Off Off
01 01 06
01 50 10
01 02 01
'D' 'D' 'D'
Scanner
Type
√ √
√
√ √
√ √
√ √
√ √
√ √
√ √
141