Removing A Password - Datalogic Skorpio X3 User Manual

4

Removing a Password

To remove a password:
1. Enter blanks in both "Password" fields.
2. Select/tap "Set Password".
Password Request Dialog Box
Once the password is set, the next time you open the "Datalogic Desktop Utility", the
DDU Password dialog box opens.
This dialog box will only open if a password was defined.
1. Type in your password using either the keypad on the unit, or using the stylus on
the soft input panel (SIP).
If you enter an incorrect password, the system will prompt you to input the cor-
rect one.
2. Select/tap "OK" to verify the password. Or tap "X" to cancel.
90
SKORPIO™ X3
1