Datalogic Skorpio X3 User Manual page 144

Universal Product Code-E (UPC-E)
Code
Description
Parameter
Enables/ disables UPC-E
Enable System
labels with a system digit
Digit 0
of zero.
Enables more aggressive
Enable
decoding algorithms to be
Aggressive
used in order to scan hard
Decoding
to read labels.
Includes the check digit in
Send
the label which is
Check Digit
transmitted.
This instructs the decoder
to include the system digit
Send System
in the label transmission.
Digit
For UPC-E, the system
digit is zero.
Instructs the decoder to
expand UPC-E labels to
Convert
their UPC-A equivalents.
UPC-E to
Any UPC-A parameters
UPC-A
will then apply to the
result.
Sets the number of times a
Read
label must be read before
Verification
it is transmitted.
Specifies the symbology
identifier (if any) that is
sent when parameter Send
Code ID (Index 0025) is
User ID
set to 3. ASCII code zero
(null) is used to indicate
that an identifier is not to
be sent for the symbology.
136
Accept.
I.D.#
Input
Enter 1 for On and 0 for Off
0508 On or Off
0509 On or Off
050A On or Off
050B On or Off
050C On or Off
0522 01 - 04
Any
single
0523 ASCII
character
(00 = Off)
Defaults
Off On On
Off On Off
Off On Off
Off On Off
Off On Off
01 02 01
'E' 'E' 'E'
6
Scanner
Type
√ √
√ √
√ √
√ √
√ √
√
√ √