Installing Dfu On The Host Pc - Datalogic Memor X3 User Manual

USE AND FUNCTIONING
4.8.2

Installing DFU on the Host PC

Datalogic Firmware Utility (DFU) provides administrators with a field upgrade
mechanism. You must have Microsoft® ActiveSync (for Windows XP devices) or
Windows Mobile® Device Center (for Windows 7 and Vista devices) already loaded
and running on the host PC to use DFU. Refer to par. 4.6.1 for more information
about Windows Mobile® Device Center.
Prior to installing, you must remove any previous versions of DFU
installed on the host PC.
NOTE
To install the Datalogic Firmware Utility, complete the following steps on the PC:
1. Go to the Datalogic website and download the latest version of the Datalogic
Firmware Utility. Unzip the file, then double-click to run DFU_Setup. exe.
2. Click OK to continue once you have removed previous versions of DFU.
3. The Welcome to DFU Setup Program screen opens.
−
Please exit all Windows applications before running this installer.
−
Click Next to continue the Setup.
4. Follow the onscreen instructions to complete the installation.
4
81