Datalogic Skorpio X3 User Manual page 136

Code 39
Code
Parameter
Enables/disables the Code
Enable
39 symbology.
Enables more aggressive
Enable
decoding algorithms to be
Aggressive
used in order to scan hard
Decoding
to read labels.
Requires the use of
Enable
checksum characters to
Checksum
verify a bar code.
Instructs the terminal to
Send
include the checksum in the
Checksum
label transmission.
Supports the entire ASCII
character set by replacing
Full ASCII
various encoded ASCII
Mode
characters with their
corresponding.
Set the minimum label
Minimum
length to be less than or
Label
equal to maximum label
Length
length.
This feature specifies the
maximum allowable length
of a Code 39 label. The
Maximum
length includes check and
Label
data characters. Maximum
Length
Label Length should be
greater than or equal to
Minimum Label Length.
Sets the number of times a
Read
label must be read before it
Verification
is transmitted.
Specifies the symbology
identifier (if any) that is sent
when parameter Send Code
ID (Index 0025) is set to 3.
User ID
ASCII code zero (null) is
used to indicate that an
identifier is not to be sent for
the symbology.
128
Description
Accept.
I.D.#
Input
Enter 1 for On and 0 for Off
0100 On or Off
0101 On or Off
0102 On or Off
0103 On or Off
0105 On or Off
0120 01 - 50
0121 01 - 50
0122 01 - 04
Any
single
0123 ASCII
character
(00 = Off)
Defaults
Off On On
Off On Off
Off Off Off
Off Off Off
Off On On
01 01 01
01 50 20
01 02 01
'C' 'C' 'C'
6
Scanner
Type
√ √
√
√ √
√ √
√ √
√ √
√ √
√ √
√ √