Datalogic Skorpio X3 User Manual page 142

European Article Numbering-8 (EAN-8)
Code
Description
Parameter
Enables/disables the EAN-
Enable
8 symbology.
Enables more aggressive
Enable
decoding algorithms to be
Aggressive
used in order to scan hard
Decoding
to read labels.
Instructs the terminal to
Send
include the check digit in
Check Digit
the label transmission.
Instructs the decoder to
expand EAN-8 labels to
their EAN-13 equivalents.
Convert EAN-8
Any EAN-13 parameters
to EAN-13
will then apply to the
result.
Sets the number of times
Read
a label must be read
Verification
before it is transmitted.
Specifies the symbology
identifier (if any) that is
sent by the decoder when
parameter Send Code ID
(Index 0025) is set to 3.
User ID
ASCII code zero (null) is
used to indicate that an
identifier is not to be sent
for the symbology.
134
Accept.
I.D.#
Input
Enter 1 for On and 0 for Off
0518 On or Off
0519 On or Off
051A On or Off
051B On or Off
0526 01 - 04
Any
single
0527 ASCII
character
(00 = Off)
Defaults
Off On On
Off On Off
Off On Off
Off On Off
01 02 01
'G' 'G' 'G'
6
Scanner
Type
√ √
√ √
√ √
√ √
√
√ √