Datalogic Skorpio X3 User Manual page 150

MSI
Code
Parameter
Enables/ disables the MSI
Enable
symbology.
Enables more aggressive
Enable
decoding algorithms to be
Aggressive
used in order to scan hard
Decoding
to read labels.
An MSI label must contain 2
Require 2
check digits.
Check Digits
This instructs the decoder
to include any enabled
Send Check
check digit(s) in the label
Digits
which is transmitted.
Instructs the decoder to
interpret any second MSI
2nd Check Digit
check digit as modulo 11
Mod 11
instead of modulo 10
Set the minimum label
Minimum
length to be less than or
Label
equal to maximum label
Length
length.
This feature specifies the
maximum allowable length
of an MSI label. The length
Maximum
includes check and data
Label
characters. Maximum Label
Length
Length should be greater
than or equal to Minimum
Label Length.
Sets the number of times a
Read
label must be read before it
Verification
is transmitted.
Specifies the symbology
identifier (if any) that is sent
by the decoder when
parameter Send Code ID
(Index 0025) is set to 3.
User ID
ASCII code zero (null) is
used to indicate that an
identifier is not to be sent
for the symbology.
142
Description I.D.# Accept. Input
Enter 1 for On and 0 for Off
0608 On or Off
0609 On or Off
060A On or Off
060B On or Off
060C On or Off
0624 01 - 15
0625 01 - 15
0626 01 - 04
Any
single
0627 ASCII
character
(00 = Off)
Scanner
Defaults
Off On Off √
Off On Off √
Off Off Off √
Off On Off √
Off Off Off √
01 01 04 √
01 15 10 √
01 02 01 √
'H' 'H' 'H' √
6
Type
√
√
√
√
√
√
√
√