Datalogic SKORPIO Information

SKORPIO HANDHELD INFORMATION
Please remove any protective film that may be covering the laser
screen window.
TOUCH SCREEN CALIBRATION
If the touchscreen is not responding properly to stylus touch taps, the
touchscreen may need to be recalibrated.
1. Tap the Start button in the lower left corner of the system tray.
2. Select Settings, then Control Panel.
3. Scroll the window if necessary and double tap the Stylus icon.
4. Select the "Calibration" tab.
5. Tap the "Recalibrate" button and follow the instructions on the
screen.
SET DATE/TIME/TIME ZONE
1. Tap the Start button in the lower left corner of the system tray.
2. Select Settings, then Control Panel.
3. Scroll the window if necessary and double tap the Date/Time
icon.
4. Set the current date, time, and time zone.
5. Tap the Apply button and close the screen.
SET TIME SEPARATOR
1. In Control Panel, select Regional Settings.
2. Tap the Customize button.
3. Select the "Time" tab.
4. Set the Time Style to "h:mm:ss tt"
5. If the "Time Separator" is not the colon ":" character, select the Time Separator box.
6. Select the ":" character from the drop-down list (or type it in using the on-screen keyboard).
7. Tap the "OK" button at the top of the screen.
SET SHORT DATE FORMAT
1. In Control Panel, select Regional Settings.
2. Tap the Customize button.
3. Select the "Date" tab.
4. Set the Short Date Style to "MM/dd/yyyy".
5. If the "Date Separator" is not the "/" character, select the Date Separator box.
6. Select the "/" character from the drop-down list (or type it in using the on-screen keyboard).
7. Tap the "OK" button at the top of the screen.