Bar Code Parameters - Datalogic Skorpio X3 User Manual

BAR CODE PARAMETERS

The following table lists the standard customer programmable settings for the
Skorpio X3™:
Codabar
Code
Description
Parameter
Enables/disables the
Enable
Codabar symbology.
Enables more aggressive
Enable
decoding algorithms to be
Aggressive
used in order to scan hard
Decoding
to read labels.
Requires the use of
Enable
checksum characters to
Checksum
verify a bar code.
Instructs the terminal to
Send
include the checksum in
Checksum
the label transmission.
Instructs the decoder to
transmit the decoded start
and stop characters of
Send Start/
Codabar labels. The start
Stop
and stop characters will
both be translated as A, B,
C, or D.
Restricts the Codabar
decoder to only read labels
that conforms to CLSI
Convert to specifications. Label length
must be 14, and the data is
CLSI
split into fields of 1, 4, 5,
and 4 characters separated
by spaces.
Allows wide gaps to appear
Allow Wide
between characters in a
Intercharacter
label.
Gaps
Set the minimum label
Minimum
length to be less than or
Label
equal to maximum label
Length
length.
126
Accept.
I.D.#
Input
Enter 1 for On and 0 for Off
0300 On or Off
0301 On or Off
0302 On or Off
0303 On or Off
0305 On or Off
0306 On or Off
0307 On or Off
0320 01 - 50
Defaults
Off On On
Off On Off
Off Off Off
Off Off Off
Off On Off
Off Off Off
Off On On
01 01 04
6
Scanner
Type
√ √
√
√ √
√ √
√ √
√ √
√ √
√ √