4.13 Autostart; Installing Cab Files - Datalogic Skorpio X3 User Manual

USE AND FUNCTIONING

4.13 AUTOSTART

The AutoStart program provides three functions:
Allows you to create a list of applications (with optional command line
-
arguments) to run automatically prior to loading CAB files.
Automatically reinstalls specified CAB files when the Skorpio X3 10 is cold
-
booted.
Allows you to create a list of applications (with optional command line
-
arguments) to run automatically after loading CAB files.
AutoStart launches each time the Skorpio X3 is rebooted executing each line with the
specified command line arguments. It will take into account any AutoStart options at
the beginning of the line.
Upon a Cold Boot, AutoStart installs all the CAB files located in the \FlashDisk\CAB
folder. If the CAB folder does not exist, no CAB files will be installed.
AutoStart will then run the
executing each line with the specified command line arguments. It will take into
account any AutoStart options at the beginning of the line.
4.13.1

Installing CAB files

Copy any CAB files you want to install into the \FlashDisk\CAB folder. These CAB
files will then be automatically in-stalled in alphabetical order the next time you start
the device.
Autostart.ini
from the \FlashDisk directory,
4
107