Datalogic Skorpio X3 User Manual page 156

Composite
Code
Parameter
Enables/disables the
Composite
Composite symbology.
Enable
Instructs the decoder to
Composite to transmit the label data as
one or more GS1-128
GS1-128
labels.
Set the minimum bar code
label length to be less than
Composite
or equal to maximum label
Minimum
length.
This feature specifies the
maximum allowable length
of a label. The length
includes check and data
Composite
characters, if applicable.
Maximum
Maximum Label Length
should be greater than or
equal to Minimum Label
Length.
Specifies the symbology
identifier (if any) that is
sent when parameter Send
Code ID (Index 0025) is
Composite
set to 3. ASCII code zero
User ID
(null) is used to indicate
that an identifier is not to
be sent for the symbology.
For the 2D Imager, GS1 DataBar Expanded's User ID is used for Composite when User
NOTE:
ID is selected as the symbology ID.
148
Description
Accept.
I.D.#
Input
Enter 1 for On and 0 for Off
0A10 On or Off
0A14 On or Off
0A28 1-2435
0A29 1-2435
Any
single
0A2B ASCII
character
(00 = Off)
Defaults
Off On Off
Off Off Off
1 1 1
1 2435 2435
'b' 'b' 'b'
6
Scanner
Type
√
√
√
√
√