Table of Contents
Advertisement
Wireless Access Point User Guide
Log Settings (Syslog)
If you have a Syslog Server on your LAN, this screen allows you to configure the Access Point to send log
data to your Syslog Server.
Data - Log Settings Screen
Syslog Server
Syslog Server Address
Minimum Severity
Level
Figure 61: Log Settings (Syslog) Screen
Select the desired Option:
•
Disable - Syslog server is not used.
•
Broadcast - Syslog data is broadcast. Use this
option if different PCs act as the Syslog server at
different times.
•
Send to specified Syslog Server - Select this if the
same PC is always used as the Syslog server. If se-
lected, you must enter the server address in the
field provided.
Enter the name or IP address of your Syslog Server.
Select the desired severity level. Events with a severity
level equal to or higher (i.e. lower number) than the
selected level will be logged.
82
Advertisement
Table of Contents
