Table of Contents
Advertisement
Client Mode
Profile
In the first page, you can see the profile list to show the information including Profile name,
SSID, Channel, Authentication, Encryption and Network Type. Use four buttons to manage
the profile list. The "Add" button is to add a new profile. The "Delete" button is to delete the
selected profile. The "Edit" button is to edit the selected profile. The "Activate" button is to
enable the selected button, so this device will associate to the AP according to the profile.
Note: The green icon will be shown if try to connect it in Ad Hoc of AP Client mode.
System Configuration
Item
Profile Name
SSID
Network Type
Channel
11B Preamble Type
Power Saving Mode
RTS Threshold
Fragment Threshold
Description
Enter your profile name.
Enter the SSID of the AP or Ad Hoc network.
Choose one between "802.11Ad Hoc" and Infrastructure.
This option shows only for the Ad Hoc network. Select one
for it.
In the Ad Hoc network, choose "Long" for the compatibility
of the some old 802.11b station cards, or "Auto" for setup
this option automatically.
For the Infrastructure network, this device can be setup to
CAM (Constantly Awake Mode) or Power Saving Mode.
Check the box to setup the RTS Threshold. The default
value is 2347 and the available range is from 0 to 2432.
Check the box to setup the Fragment Threshold. The
default value is 2346 and the available range is from 256 to
2432.
36
Advertisement
Table of Contents
