2. Getting Start
2.1 Know the WAP-0003 11g Wireless Network Access Point
Ports:
●
Power Receptor
●
Reset Button
●
RJ-45 Ethernet Port
Straight through cable is required to connect with router or switch
Cross-over cable is required to connect to computer directly
LEDs:
●
Power LED: ON when the unit is powered up
●
LAN LED: ON indicates LAN connection; BLINK indicates LAN activity
●
WLAN LED: ON indicates WLAN is working; BLINK indicates wireless
activity.
2.2 Connect to the 11g Wireless Network Access Point
Build the Infrastructure Mode
In order to setup an Infrastructure of a wireless network such as the example shown
above, you will need the following:
4