4. Adding Virtual Access Points
EAP-110 possesses the feature of multi-ESSID; namely, it can behave as multiple virtual access points,
providing different levels of services from the same physical AP device.
Please click on the AP icon to review the VAP Overview page.
To proceed with specific VAP configuration, click on the corresponding cell in the State column and
the row of the VAP; the particular VAP's Configuration page will then appear for further configuration.
Please select the desired VAP profile from the drop-down menu of Profile Name. Choose Enable for
the VAP field. Pick a descriptive Profile Name and an appropriate ESSID for clients to associate to. A
VLAN ID can be provided to indicate the traffics through this particular VAP. It may allow further
management/control (e.g. access rights and Internet usage, etc) of each VAP with a management
gateway. Click SAVE and then Reboot for the changes to take effect.
VAP Overview Page
VAP Configuration Page (VAP-1 shown)
17