Setting Up Forwarding And Remote Access - Xerox TF4025.4075 User Manual

Setting up Forwarding and Remote Access

Entering Access Code
Access Code
You must enter an access code to be able to receive transferred messages, or listen to and
control your answering machine from other telephones.
Remote Control On/Off
Notice
Remote Control On/Off
The remote control is switched off with the factory-installed access code (
Change the access code to switch on the remote control. If you want to switch the
remote control off enter the factory-installed code
Press b.
1.
ACCESS CODE
Using [ select
2.
Confirm with OK.
3.
Notice
Access Function
You can also call the function by pressing OK, 79 and OK.
4. Enter a four-digit code.
No Identically PIN Codes!
The access code may not be identical to the VIP code.
Confirm with OK.
5.
Forwarding Messages
Forwarding Messages
The device forwards messages to a specified telephone number. Once the configured number
of messages is reached, the device calls the number. If the call is answered, a greeting text is
played. Then the person on the line must enter the access code. If no code is entered or an
incorrect code is entered three times, the device hangs up.
Press b.
1.
FORWARDING
Using [ select
2.
Confirm with OK.
3.
Notice
Access Function
You can also call the function by pressing OK, 77 and OK.
Use [ to select whether you would like to switch forwarding on or off.
4.
.
CAUTION!
.
Answering Machine · Setting up Forwarding and Remote Access¦ 43
0000
again.
0000
).