Setup Mode
The Setup Editor
The Channel/Program (CH/PROG) Page
This is the first page you see when you enter the Setup Editor. Here, you can select programs,
MIDI channels, and MIDI Bank numbers for each of the setup's 16 zones. You can also solo or
mute each zone.
Parameter
Program
Destination
Channel
MIDI Bank
MIDI Program (MidiProg)
Status
InputChannel
MIDI Bank Mode (BankMode)
Entry Program Change (EntryProgChg)
Arpeggiator
Program
This selects an internal program to play on each zone. As you change the value of Program,
notice that MIDI Program and MIDI Bank match the local program and bank numbers
(programs 1–127 fall into MIDI Bank 0, 128–255 fall into MIDI Bank 1, and so on—both MIDI
Banks and PC3LE banks can hold 128 programs). If you want to transmit different program and
bank numbers over MIDI, highlight either MIDI Program or MIDI Bank and select a new value.
Note that changing the Program parameter again will reset both the MIDI Program and MIDI
Bank parameters to match the local program and bank numbers. You can enter the Program
Editor for the program on the currently selected zone by selecting the Program field and
pressing the Edit button to the left of the display. Exit the Program Editor to return to the Setup
Editor of the current setup.
Destination
This parameter determines whether the currently selected zone transmits only to the PC3LE
(Local), transmits only to the MIDI port (MIDI), transmits only to the USB port (USB_MIDI),
transmits to a pair of destinations (MIDI+Local, USB_MIDI+Local, or USB_MIDI+MIDI), or
transmits to all destinations (USB_MIDI+MIDI+Local).
7-6
Range of Values
Program List
Destination List
1 to 16
0 to 127
(Depends on MIDI Bank Mode)
Muted, Active, Solo, Solo+Muted
None, 1-16 L+M, 1-16 M
MIDI Bank Mode List
On, Off
On, Off
Default
1 Standard Grand
USB_MIDI+MIDI+Local
Same as Zone #
0
1
Active
None
Ctl 0/32
On
On