Kurzweil PC3LE Musician's Manual page 261

Chapter 11
Storage Mode
Use Storage mode to load, save, back up, and copy files between the PC3LE and the outside
world. Storage Mode can load and save with a USB device (such as a thumb drive) or with a
computer by using the USB Computer port. Storage Mode features include:
• Save all PC3LE objects (Programs, Setups, Songs, etc.) or a selection of PC3LE objects to a .PLE
file (see The STORE Page on page 11‐6.)
• Load a group of objects or a single object from a .PLE or compatible file (see The LOAD
Page on page 11‐8 for details.) (See Appendix C for file compatibility details.)
• Load a standard MIDI sequence file (.MID file) which can be played in Song Mode or used
as a riff in Setup Mode (see The LOAD Page on page 11‐8 for details.)
• Export a song from Song mode as a standard MIDI sequence file (see Export on page 11‐11.)
• Export a list of controller assignments or a list of objects (see Export on page 11‐11.)
• Organize files and folders on a USB device (see The Utilities (UTILS) Page on page 11‐10.)
Storage Mode Page
To enter Storage mode, press the Storage button, and the Storage mode page will appear:
Use this page to select the storage device you wish to use. The currently selected device will be
read from or written to when you load, save, rename, or delete files in Storage mode. You can
load and save with a USB device (such as a thumb drive) by using the USB Storage port or with
a computer by using the USB Computer port on the rear of the PC3LE (see Using USB Devices
below for details.)
In the center of the page the currently selected storage device is highlighted. Use the cursor
buttons, ‐/+ buttons or the alpha wheel to select one of the two storage devices. (You can also select
the USB drive by pressing the USBDrv soft button.) When the USB drive is selected, there will be a
prompt telling you that the USB‐MIDI connection will be disconnected. You must acknowledge
this prompt to continue.
The status of the selected device will be displayed as either ready or you will see a "No
connection" message. The top right‐hand corner of the page displays the currently selected
storage device. If you are having trouble selecting a device that you have plugged in, try exiting
Storage mode and then entering Storage mode again.
Storage Mode
Storage Mode Page
11-1