Kurzweil PC3LE Musician's Manual page 312

Tutorials: Setup Mode
Adjusting The Volume And Pan Of Zones
Adjusting The Volume And Pan Of Zones
You will likely want to adjust the volume of Zones in a setup. You can also adjust the pan (left/
right speaker position) of each Zone. Each setting is easily controlled in the setup editor. For
more details of the settings on this page see The Pan/Volume (PAN/VOL) Page on page 7‐26 in
Chapter 7, Setup Mode.
Let's look at the setup 38 Jazz Bass/Piano and adjust the volume and pan of Zone 2 which
contains the piano program 8 Grand "Evans":
1.
2.
3.
14-10
If you are not already in Setup mode, press the Exit button until you reach the ProgramMode page,
then press the Setup mode button, located with the mode buttons to the left of the display. This will
bring you to the Setup mode main page. Next, with the setup 38 Jazz Bass/Piano selected in setup
mode, press the Edit button on the front panel. This will bring you to the CH/PROG page of the
setup editor (see below.)
From the CH/PROG page, press the PANVOL soft button on the bottom of the screen (see above.)
This brings you to the PAN-VOL page where you can view key and velocity ranges for the current
Zone (see below.)
On the PAN-VOL page, use the Chan/Zone buttons to the left of the display to select Zone 2. You
can view the number of the selected Zone in the top right corner of screen (see below.)
Step 2