Kurzweil PC3LE Musician's Manual page 187

to choose a note.) With the desired note selected, use the Dest field to select a controller
destination (see The Controller Destination List on page 7‐18 for details.) Set a value to send to the
controller destination with the Value field. Once a destination and value are set, the playing the
key will send the value to the controller destination on the Zone's MIDI Channel (see
Channel on page 7‐7 for details on setting each Zone's MIDI channel.) This may also send a
continuous controller message to the MIDI or USB out ports, depending on the Zone's
Destination parameter (see Destination on page 7‐6 for details.)
The Setup Editor Utility Soft Buttons
In addition to the Setup Editor's pages, there are basic library and editing soft buttons. Their
functions are described below.
Name
This enables you to rename the current setup. Use any data entry method to do this, including
the letters on the alphanumeric pad.
Save
Pressing Save calls up the standard Save Dialog. When choosing an ID#, simultaneously
pressing the ‐ and + buttons (below the Alpha Wheel) toggles between saving the setup to the
first available empty location, or replacing a currently existing setup. For more detailed
instructions on saving, see Saving and Naming on page 5‐3.
Delete
This erases a setup from memory, freeing up space to store setups in other locations. (You can
check the free memory in the PC3LE at any time, on the top line of the pages in Master mode.)
Press Delete, and you will be given a choice to Delete or Cancel. Press Delete again, and an "Are
You Sure?" message will appear. Press Yes to delete the setup, or No to cancel.
Factory ROM setups can not be deleted.
New Zone (NewZn)
Press NewZn to create a new zone with default parameters. The PC3LE imports this zone from
Zone 1 of 128 Default Setup. If there are parameters or entire pages you use often, you can
create your own Default Setup and save it to location 128; pressing NewZn will then import
zones from your custom Default Setup.
Duplicate Zone (DupZn)
This adds a new zone with the same parameters as the current zone.
Import Zone (ImpZn)
You can import, or "bring in," any zone from any setup in memory. Press ImpZn, and use any
data entry method to choose a setup to import from. Then use the Chan/Zone buttons to select
one of that setup's zones. Now press Import, and the zone you selected will be added to the
current setup.
Note: If you are using all 16 zones in a setup and you try to add, duplicate, or import a zone, a
"No More Zones" message appears. You must delete an existing zone before you can add,
duplicate, or import any new ones.
Setup Mode
The Setup Editor
7-65