Kurzweil PC3LE Musician's Manual page 252

Song Mode and the Song Editor
Song Editor: Track Functions
Insert
The Insert function is used to add blank time to the current song, modifying the song's End
point appropriately. The Insert function will affect all tracks. This is similar to splicing a piece of
blank tape to an existing segment of recording tape.
Location: Bars : Beats : Ticks
The insertion point for the blank time being added is selected as a Bar and Beat Location value.
Events that occurred at or after this Bar and Beat, before you insert time, are not erased when
you perform this function, rather they are offset by the length of the blank time being added to a
Bar and Beat later in the song.
Amount: Bars : Beats : Ticks
The length of the blank time being added is defined as a number of Bars and Beats in the
Amount parameter.
There are no Region/Criteria parameters available for the Insert function.
Delete
The Delete function is used to remove a region of time from the current song. This function is
different from the erase function because not only does it remove the events from the selected
time, it will delete the entire selected range of time from the song, modifying the song's End
point appropriately (on all tracks). This is similar to cutting a section out of a tape and splicing
the ends.
10-26