Metronome; Countoff - Kurzweil PC3LE Musician's Manual

The Keep Soft Button
Pressing the Keep soft button captures the current settings for each track's program, panning,
and volume as the initial settings. Remember to save if you want these change to be permanent!
The Done Soft Button
If no changes were made in the MIXER page, pressing the Done soft button calls up the MAIN
page. If changes were made, pressing the Done soft button calls up the "Save Changes" dialog.
Song Mode: The METRONOME Page
All of the parameters affecting the sequencer metronome are on the METRONOME page. Like
the other pages in the Song Editor, you can save changes made in this page.
Parameter

Metronome

Count Off
Program
Channel
Strong Note
Strong Velocity
Soft Note
Soft Velocity
Metronome
This parameter determines the recording modes in which the metronome plays. With
Metronome set to Off, the metronome never plays. With Metronome set to Rec, the metronome
only plays during recording. With Metronome set to Always, the metronome plays during
playback and recording. With Metronome set to CountOff, the metronome plays only during
count off (if the CountOff parameter is set to something other than Off.)

CountOff

This parameter determines the number of measures the PC3LE will count off before recording.
With StartOnly selected, the PC3LE will only count off at the beginning of a sequence. With
Always selected, the PC3LE will count off from any point in a sequence.
Range of Values
Off, Rec, Always, Countoff
Off, 1, 2, 3, 4 (StartOnly,
Always)
Program List
1 to 16
0 to 127
0 to 127
0 to 127
0 to 127
Song Mode and the Song Editor
Song Mode: The METRONOME Page
Default
Rec
1 (StartOnly)
998 Click Track
16
102
127
104
100
10-13