Kurzweil PC3LE Musician's Manual page 268

Storage Mode
The LOAD Page
The LOAD Page
Pressing the LOAD soft button calls up the LOAD page (see below,) where you can load a .PLE
or compatible Kurzweil file, individual objects from within those files, or a MIDI sequence file
(.MID) from the current storage device. See Appendix C for compatibility details.
Use the cursor buttons, ‐/+ buttons or the alpha wheel to browse the files in the currently
selected storage device. See below for descriptions of the soft buttons on this page, which help
you browse and select the files in the currently selected storage device.
After selecting the file or files to load, press the Ok soft button, and you will be prompted to
choose a bank to load the selected object(s) or MIDI file(s) into. See Loading Methods on page 11‐10
for instructions on choosing a bank to load to after pressing Ok.
Note: When selecting a file to load, file names on the Load page that are longer than eight
characters will be shortened to eight characters and spaces will be removed. (This has no effect on
the names of objects stored within a .PLE or other compatible file type.) When loading a MIDI file
(.MID) to Song mode, the PC3LE will attempt to use the MIDI file's internal sequence name as
the Song name. If the internal sequence name can not be loaded, the first eight characters of the
file name will be used as the Song name. Shortened song names can be renamed in Song mode
Select
SelAll
Parent
Open
OK
Cancel
11-8
Select or deselect the highlighted file. An asterix (*) appears to the left of selected
files. Multiple files can only be selected if they are in the same directory. Entering a
new directory will deselect all files.
Press the SelAll soft button to select or deselect all files in the current directory
(directories within the current directory will not be selected.) Entering a new
directory will deselect all files.
Moves you up one level in the directory hierarchy. If the display is already at the
root directory, this button has no effect. Entering a new directory will deselect all
files.
Open selected directory or view objects within a .PLE or compatible Kurzweil file
for loading individual objects. See Loading Individual Objects below for instructions
on opening a .PLE or compatible Kurzweil file to view and load individual objects
(See Appendix C for compatibility details.) Entering a new directory will deselect all
files. Viewing objects within a .PLE or compatible Kurzweil file will deselect any
other files that had been selected.
Load the selected .PLE or compatible Kurzweil file. See Loading
Methods on page 11‐10 for instructions on using the Load dialogue presented after
pressing Ok.
Exits the Load page and returns you to the Storage mode page.