Setup Mode
The Setup Editor
Press Delete to delete the pattern from memory. Press Rename to rename the pattern and save.
Pressing Save gives you the option to save the pattern or rename and save. To create a new
VelPatt, edit an existing pattern and choose Rename when saving. Press Exit to return to the
ARPEGGIATOR page. When exiting the editor, it will automatically give you the option to save
the pattern if changes have been made. For more detailed instructions on these functions, see
Saving and Naming on page 5‐3.
The Human1 through Human4 settings randomly change played note velocity within a range in
order to make arpeggiation sound more human like, with each note varying slightly in velocity.
The Human settings use the velocity received from the first note played as the center of the
randomization range. Each note of the arpeggiator will randomly choose a velocity within the
given range. (See the table below for velocity ranges.)
The Chimp1 through Chimp4 settings function in a similar fashion to the Human settings (see
above.) Like the Human settings, the Chimp settings randomly change played note velocity
within a range, but the Chimp settings have larger randomization ranges. The Chimp settings
use the velocity received from the first note played as the center of the randomization range.
Each note of the arpeggiator will randomly choose a velocity within the given range. (See the
table below for velocity ranges.)
Note: For Human and Chimp modes, if the velocity of the first played note is low enough that the selected
randomization range could result in a velocity of zero, some notes may have a velocity of zero and therefore
produce no sound.
Velocity Setting
Human1
Human2
Human3
Human4
Chimp1
Chimp2
Chimp3
Chimp4
7-38
Velocity
Randomization
Range
± 3
± 6
± 10
± 15
± 25
± 35
± 50
± 64