Kurzweil PC3LE Musician's Manual page 269

Loading Individual Objects
Since files can contain over 3000 objects, it is often useful to load only a subset of the information
contained in a .PLE file. Sometimes, this capability is necessary even to be able to load certain
files, if the size of the file's data is greater than the PC3LE's internal RAM size.
You can select individual objects or groups of objects (programs, effects, songs) for loading from
within a single .PLE file. The Load Object feature is accessible from the LOAD page. To activate
it, scroll the file list until you have highlighted the file that you wish to load objects from.
Press Open to begin the Load Object dialog. The PC3LE then scans the file contents in order to
present a list of all of the objects in the file. Sometimes this procedure can take a few moments,
depending on how many objects are in the file.
The objects in the list are grouped by type (program, setup, etc.). Scroll through the list using the
alpha wheel, cursor buttons, or ‐/+ buttons. Each line in the list represents one object, and
displays the object's number in the list, as well as the object's type, ID number, and name. The ID
numbers are the same numbers that were used to reference the objects when the file was last
saved by the PC3LE.
Entering in a number from the alphanumeric buttonpad will jump to the indexed entry, and
typing in a large number like 9999 will go to the end of the list.
The following soft buttons are used for selecting objects to load:
Select Select or deselect the highlighted object.
Next Scroll to next entry. Same function as pressing the down cursor button or the +
button, or turning the Alpha Wheel one click clockwise.
Type Jump to next object type in the list.
OK Load the selected objects.
Cancel Exits the Store Advanced page.
Select All/Deselect All
Selecting or deselecting all of the objects at once can be done with the same double‐presses as
described for the file list dialog, namely:
• Left/Right cursor double‐press: Select All Objects
• Up/Down cursor double‐press: Clear All Selections
If you want to load most but not all of the items from a file (for example, if there happens to be a
Master table in the file that you don't want to load), it may be fastest to first select all objects
using the Left/Right double‐press, and then manually deselect any unwanted items.
Storage Mode
The LOAD Page
11-9