Storage Mode
The Utilities (UTILS) Page
Loading Methods
Once you have pressed OK to load the selected file(s) or object(s), you must select a loading
method. This determines the whether or not existing objects in the PC3LE will be deleted when
the new objects are loaded. You will see this dialog:
Caution: Carefully read the description of each loading method before pressing one of the soft buttons.
Some of the loading methods will delete existing objects in the PC3LE.
The soft buttons control the mode for loading and renumbering of objects from the file. Here's
how they work:
Overwrt
Append
Cancel
The Utilities (UTILS) Page
Pressing the UTILS soft button calls up the Utilities page. Use the Utilities page to create
directories (folders) on the current USB device, or use the Utilities page to delete, rename or
copy files on the current USB device. See the soft buttons below for the each available function:
Soft Buttons on the Utilities Page
NewDir
Delete
Rename
Copy
Open
Parent
11-10
First deletes all existing user RAM objects and then loads objects using the object ID
numbers stored in the file.
Try to use the object ID numbers stored in the file for the objects to be loaded. If an
ID number is already in use, increment the ID number until a free slot is found.
Cancel the mode selection, and go back to choosing files.
Create a new directory (folder) in the current directory. Directories created by the
PC3LE can have names up to eight characters long.
Delete the highlighted file from the current device.
Change the name of a file.
Copy a file to a different directory. After pressing Copy, you must select a directory
to copy to, press the Open soft button to open the directory to copy to, then press
the Ok soft button to copy the file. You can also press the NewDir soft button to
create a new directory to copy to.
Opens the highlighted directory.
Moves you up one level in the directory hierarchy. If the display is already at the
root directory, this button has no effect.