Fan Preparation - Casablanca Reverie Owner's Manual

PERMA•LOCK™ HARDWARE (not to scale)
Uplight Lightbulbs
S-11 25-watts (4)
Decorative Arm Assembly
IMPORTANT SAFETY INFORMATION:
Before starting the installation of your ceiling
fan, install the threaded downrod into the motor
coupling and lock the assembly.
Prepare for fan installation as follows:
Step 4a. Remove the paper shield from the motor.
Step 4b. Using the provided Allen wrench (attached to the
paper motor warning shield), loosen the Allen set screw
attached to the motor coupling.
NOTE:
Th ere are two installation options available:
• With Leaf Assembly
• Without Leaf Assembly
If installing Leaf Assembly, follow Steps 5 through 6.
If not installing the Leaf Assembly, continue to Step
6 now.
6

FAN PREPARATION

Allen Wrench
Decorative Leaf
Assembly Pieces (3)
Allen Wrench
12" Perma•Lock™ Downrod
and Ball Assembly
(for decorative leaf installations)
3" Perma•Lock™ Downrod
and Ball Assembly
(for non-leaf installations)
Paper Shield
Allen Set Screw