Safety Precautions
The following precautions should be employed to ensure safe, reliable
operation of this device:
Read the enclosed instructions, and save them for future reference
•
Do not place the device on an unstable surface. If the device falls,
serious damage will result
•
Follow all warnings and instructions marked on the device (if
applicable)
•
Do not use the device near water
•
Do not place the device near or over any device that produces heat (i.e.
radiators, heat registers etc.)
•
To ensure adequate ventilation and reliable operation, never block the
vent openings
•
Do not place the device on a soft surface (i.e. bed, carpet, etc.) as this
will block ventilation openings. Similarly, never place the device in a
built-in enclosure unless adequate ventilation is provided
•
Never spill liquid of any kind on the device
•
Unplug the device from the wall, prior to cleaning. Do not use liquid or
aerosol cleaners, instead use a damp cloth
•
The device should be operated from the type of power source indicated
on the marking label. If you are unsure of the type of power available,
please contact your local power company
•
The device is equipped with a 3-wire grounding type plug. This is a
safety feature that should be left intact at all times. If you are unable to
insert the plug into the outlet, contact your electrician to replace the
available (outdated) outlet. Do not attempt to defeat the purpose of or
bypass the grounding-type plug; always follow local wiring codes
•
Position system cables and power cables carefully. Do not allow
anything to rest on the power cord or cables. Route the power cord
and cables so that they cannot be stepped or tripped on
•
If an extension cord is used with this device, make sure that the
Instruction Manual
iii
Need help?
Do you have a question about the 16 Port StarView CAT5 UTP KVM and is the answer not in the manual?
Questions and answers