StarTech.com 16 Port StarView CAT5 UTP KVM Instruction Manual page 27

Setting
QVIEW +
POWERED ON
PORT ID
DISPLAY
MODE
SCAN
DURATION
SCAN/SKIP
MODE
SCREEN
BLANKER
HOTKEY
COMMAND
MODE
Instruction Manual
Lists only the ports that have been selected as Quick
View Ports and are connected to powered computers
Selects how the Port ID is displayed
Options include: The Port Number alone (PORT
NUMBER), the Port Name alone (PORT NAME), or
the Port Number plus the Port Name (PORT NUMBER
+ PORT NAME) (default)
Determines how long focus is given to each port as it
cycles through the selected ports in Auto Scan Mode.
Key in a value from 1 - 255 seconds, then press [Enter].
Default is 5 seconds; a setting of 0 (zero) disables the
Scan function.
Selects which computers will be accessed under Skip
Mode and Auto Scan Mode
Choices are: ALL - All the Ports which have been set as
POWERED ON - Only those Ports which are powered
QUICK VIEW - Only those Ports which have
QUICK VIEW + POWERED ON - Only Ports set
If there is no input from the console for the amount of
time set with this function, the screen is blanked. Key in
a value from 1 - 30 minutes, then press [Enter]
A setting of 0 (zero) disables this function (default)
Enables or Disables the Hotkey Command function in
case a conflict with programs running on the computers
occurs. The default is ON.
Function
Accessible
and have been set as accessible and
are Powered On
been set Accessible and have
been selected as Quick View
Ports
as Accessible and have been
selected as Quick View Ports
and are Powered On.
20