StarTech.com 16 Port StarView CAT5 UTP KVM Instruction Manual page 29

Setting
EDIT PORT NAMES
RESTORE DEFAULT
VALUES
CLEAR THE NAME
LIST
ACTIVATE BEEPER
Instruction Manual
To help remember which computer is attached to a
particular port, every port can be given a name. This
function allows the Administrator to create, modify,
or delete port names. To Edit a port name:
1. Use the Navigation Keys to move the highlight
bar to the port you want, then press [Enter].
2. Key in the new Port Name, or modify/delete
the old one. The maximum number of
characters allowed for the Port Name is 12.
Legal characters include:
All alpha characters: a - z; A - Z
All numeric characters: 0 - 9
+ - / . and Space
The entered information is NOT case sensitive,
rather the Port Name will be displayed in all capitals.
3. When you have finished editing, press [Enter]
to implement the change. To abort the
change, press [Esc]
This function is used to undo all changes and return
the setup to the original factory default settings,
except for the Names settings that were assigned
to the Ports
Similar to Restore Default Values with the exception
that this feature also clears the Names settings
along with undoing all changes and returning the
setup to the original factory default settings.
Choices are:
Y (ON) or N(OFF)
When activated, the beeper sounds whenever a
Port is changed, the Auto Scan function is activated
or an invalid entry is made on an OSD menu
22
Function