StarTech.com 16 Port StarView CAT5 UTP KVM Instruction Manual page 30

Setting
SET QUICK VIEW
PORTS
SET ACCESSIBLE
PORTS
Instruction Manual
This function lets the Administrator select which
Ports to include as Quick View ports:
• To select/deselect a port as a Quick View Port,
use the Navigation Keys to move the highlight
bar to it, then press [Enter]
• When a port has been selected as a Quick View
Port, an arrowhead will be displayed in the QV
column of the LIST on the Main Screen to
indicate so. When a port is deselected, the
arrowhead disappears
• If one of the Quick View options is chosen for
the LIST view, only a Port that has been selected
here will display on the List
• If one of the Quick View options is chosen for
Auto Scanning, only a Port that has been
selected here will be Auto Scanned. The default
is for no ports to be selected.
This function allows the Administrator to define User
access to the computers on the installation on a
Port-by-Port basis. For each User, select the target
Port, then press the [Spacebar] to cycle through
the choices:
F (Full access), V (View Only), or Blank (No access
rights granted, Port will not appear on the User's
LIST on the Main Screen.)
Repeat until all access rights have been set, then
press [Enter].
The default is F for all users on all Ports.
23
Function