Performing The Upgrade - StarTech.com 16 Port StarView CAT5 UTP KVM Instruction Manual

select the F4ADM function.
5. Scroll down to ADAPTER UPGRADE. Press [Enter].
6. In the screen that comes up, press [Y] to invoke Upgrade Mode.
Please Note:
1. A message appears reminding you to connect an adapter cable. The
message appears even if you have adapter cables connected. If all the
adapter cables you want to upgrade have already been connected,
simply ignore the message.
2. The upgrade takes place via the Cat 5 cable that connects the adapter
cable to the KVM switch - so there is no firmware upgrade cable to
attach.
3. All the connected adapter cables get upgraded during a single upgrade
session.

Performing the Upgrade

Starting the Upgrade
To upgrade your firmware:
1. Run the downloaded Firmware Upgrade Package file - either by
double-clicking the file icon, or by opening a command line and keying
in its location.
2. When the Firmware Upgrade Utility Welcome screen appears, please
review the License Agreement, enable the I Agree radio button, and
click on Next.
3. The Firmware Upgrade Utility main screen will appear and inspect
your installation. All of the devices capable of being upgraded by the
downloaded package will be listed in the Device List panel. Highlight
the devices you wish to upgrade and click on Next.
4. If you enabled Check Firmware Version, the Utility compares the
device's firmware level with that of the upgrade files. If it finds that the
version already installed is higher than the upgrade version, it brings
up a dialog box informing you of the situation and gives you the option
to Continue or Cancel.
If you didn't enable Check Firmware Version, the Utility installs the
Instruction Manual
38