Hotkey Beeper Control; Hotkey Summary Table - StarTech.com 16 Port StarView CAT5 UTP KVM Instruction Manual

Table of Contents

→ Skips from the current port to the next accessible port

↑

Skips from the current port to the last accessible port of the previous

station

↓

Skips from the current port to the first accessible port of the next

station

•

Once you are in Skip Mode, you can keep on skipping by pressing the

Arrow keys. You don't have to use the [NumLock] + [-] combination

again.

•

While Skip Mode is in effect, ordinary keyboard and mouse functions

are suspended, allowing only Skip Mode compliant keystrokes can be

input. You must exit Skip Mode in order to regain normal control of the

console.

To exit Skip Mode, press [Esc] or [Spacebar].

Hotkey Beeper Control

The Beeper can be Hotkey toggled On and Off. To toggle the Beeper, key

in the following Hotkey combination:

1. Invoke Hotkey Mode.

2. Press [B]. After you press B, the Beeper toggles On or Off. The

Command Line displays Beeper On or Beeper Off for one second, then

the message disappears and you automatically exit Hotkey Mode.

The table on the following page summarizes Hotkey operations on

SV831DUTP/ SV1631DUTP:

Instruction Manual

Table of Contents

Do you have a question about the 16 Port StarView CAT5 UTP KVM and is the answer not in the manual?