StarTech.com 16 Port StarView CAT5 UTP KVM Instruction Manual page 32

Setting
ADAPTER
UPGRADE
F5 SKP
Pressing [F5] invokes Skip (SKP) Mode. This function enables you to
easily skip backward or forward - switching the console focus from the
currently active computer port to the previous or next available one.
The selection of computers to be available for Skip Mode switching is
made with the Scan/Skip Mode setting under the F3 SET function.
When you are in Skip Mode, press [ ← ] to switch to the previous com-
puter in the list, press [ → ] to switch to the next computer in the list, press
[ ↑ ] to switch to the last computer on the previous station in the list, press
[ ↓ ] to switch to the first computer on the next station in the List.
Please Note: When you Skip, you only Skip to the previous or next avail-
able computer that is in the Scan/Skip Mode selection.
• If a Port has been selected for Scan/Skip Mode, a left/right triangle
symbol next to its Port ID Display will denote focus
• While Skip Mode is in effect, the console will not function normally. You
must exit Skip Mode in order to regain control of the console.
• To exit Skip Mode, press
F7 SCAN
Pressing [F7] invokes Auto Scan Mode. This function allows you to
automatically switch among the available computers at regular intervals
so that you can monitor their activity without having to take the trouble of
switching manually.
• The selection of computers to be included for Auto Scanning is made
with the Scan/Skip Mode setting under the F3 SET function
• The amount of time that each Port displays for is set with the Scan
Duration setting under the F3 SET function. When you want to stop at
a particular location, press the [Spacebar] to stop scanning and exit
Instruction Manual
In order to upgrade the Adapter Cables' firmware,
you must first invoke its Upgrade Mode with this
setting
[Spacebar] or [Esc]
25
Function