Rack Mounting - StarTech.com 16 Port StarView CAT5 UTP KVM Instruction Manual

Table of Contents

Please Note: To ensure adequate ventilation, allow at least 5.1cm (2") on

each side, and 12.7cm (5") at the back for power cord and cable clear-

ance.

Rack Mounting

SV831DUTP and SV1631DUTP can be mounted in a 19" (1U) rack. The

mounting brackets can screw into either the front or the back of the unit

so that it can attach to the front or the back of the rack. To rack mount the

unit:

Remove the screws at the front or the rear, as shown in the diagram

below:

M3 x 6

Philips

head hex

M3 x 6

Philips

head hex

Screw the mounting brackets into the sides of the unit at the front or

the rear, as shown in the diagram on the following page:

Instruction Manual

Table of Contents

Do you have a question about the 16 Port StarView CAT5 UTP KVM and is the answer not in the manual?