Ssh, Telnet, And Logging Commands - Lantronix SLC8 Manager User Manual

Audit Log
Enable Log
Size
Include CLI
Commands
Include In System
Log
Web SSH/Web Telnet
Java Terminal
Deployment
Java Terminal
Buffer Size
SMTP
Server
Sender
Phone Home
Enable
IP Address
Last Attempt
(view only)
Results
(view only)
3. To save, click the Apply button.

SSH, Telnet, and Logging Commands

The following CLI commands correspond to the SSH/Telnet/Logging page. For more information,
see 15: Command
set services (on page 252)

set services trapenable (on page 253)

show services (on page 253)

SLC™ Console Manager User Guide
Select to save a history of all configuration changes in a circular log. Disabled by
default. The audit log is saved through SLC reboots.
Set the maximum size of a log from 1 to 500 Kbytes. The default maximum size of
a log is 50 Kbytes (approximately 500 entries).
Select to cause the audit log to include the CLI commands that have been
executed. Disabled by default.
Enable to include the audit log contents in the system log (under the General/Info
category/level). Disabled by default.
Method used to launch Java applications, either Java Web Start or Applet.
Number of lines in the Java terminal window that are available for scrolling back
through output. The valid range is 24 to 5000 and the default is 250.
IP address of your network's Simple Mail Transfer Protocol (SMTP) relay server.
The email address of the sender of outgoing emails. The strings "$host" and
"$domain" can be part of the email address - they will be substituted with the
actual hostname and domain. The default is donotreply@$host.$domain.
If enabled, the SLC console manager will attempt to phone home every hour until
it has contacted a Lantronix SLM™ management appliance and provided it with its
configuration.
IP address of the SLM management appliance.
Date and time of last connection attempt.
Indicates whether the attempt was successful.
Reference.
7: Services
64