Lcd/Keypad Commands - Lantronix SLC8 Manager User Manual

To configure the Keypad:
1. Enter the following fields.
Keypad Locked
Restore Factory
Defaults Password
To configure the LCD:
1. Select a screen and click the up arrow or the down arrow to change the order of the screens.
2. Select a screen to be removed and click the right arrow. The screen moves to the Disabled
Screens list.
3. Select a screen from the Disabled Screens list and click the left arrow. The screen is added to
the Enabled Screens list at the bottom.
Note: The User Strings screen displays the 2 lines defined by the User Strings - Line
1 and Line 2 fields. By default, these user strings are blank.

LCD/Keypad Commands

The following CLI commands correspond to the LCD/Keypad page. For more information, see
Chapter 15: Command Reference
admin keypad (on page 209)

admin keypad password (on page 209)

admin keypad show (on page 209)

admin lcd reset (on page 210)

admin lcd default (on page 209)

admin lcd screens (on page 210)

admin lcd line1 (on page 210)

admin lcd scrolling (on page 210)

admin lcd show (on page 210)

SLC™ Console Manager User Guide
Select this to lock out any input to the keypad. The default is for the keypad to be
unlocked.
The 6 digit key sequence entered at the keypad to restore the SLC console
manager to factory defaults. The default is 999999.
.
13: Maintenance
197