Ssh,Telnet, And Logging Commands - Lantronix SecureLinx SLC8 User Manual

V3 Read-Only User
User Name
V3
Password/Retype
Password
Passphrase/
Retype
Passphrase
V3 Read-Write User
User Name
V3
Password/Retype
Password
Passphrase/
Retype
Passphrase
3. To save, click the Apply button.

SSH,Telnet, and Logging Commands

The following CLI commands correspond to the web page entries described above.
To configure services (system logging, SSH and Telnet access, SSH and Telnet
timeout, SNMP agent, email (SMTP) server, and audit log):
set services <one or more services parameters>
Parameters:
SecureLinx SLC User Guide
SNMP v3 is secure and requires user-based
authorization to access SLC MIB objects. Enter a user
ID. The default is snmpuser. Up to 20 characters.
Password for a user with read-only authority to use to
access SNMP v3. The default is SNMPPASS. Up to 20
characters.
Passphrase associated with the password for a user
with read-only authority. Up to 20 characters.
SNMP v3 is secure and requires user-based
authorization to access SLC MIB objects. Enter a user
ID for users with read-write authority. The default is
snmprwuser. Up to 20 characters.
Password for the user with read-write authority to use
to access SNMP v3. The default is SNMPRWPASS. Up
to 20 characters.
Passphrase associated with the password for a user
with read-write authority. Up to 20 characters.
alarmdelay <1-6000 Seconds>
auditlog <enable|disable>
auditsize <Size in Kbytes>
Range is 1-500 Kbytes.
authlog <off|error|warning|info|debug>
clicommands <enable|disable>
contact <Admin contact info>
devlog <off|error|warning|info|debug>
diaglog <off|error|warning|info|debug>
genlog <off|error|warning|info|debug>
includesyslog <enable|disable>
location <Physical Location>
7: Services
60