Lantronix SLC8 Manager User Manual page 228

diag netstat
Syntax
diag netstat [protocol <all|tcp|udp>] [email <Email Address>]
Description
To display a report of network connections. You can optionally email the displayed information.
diag nettrace
Syntax
diag nettrace <one or more parameters>
Parameters
ethport <1|2>
host <IP Address or Name>
numpackets <Number of Packets>
protocol <tcp|udp|icmp>
verbose <low | medium | high | disable>
Description
Displays all network traffic, applying optional filters. This command is not available on the web
page.
diag ping | ping6
Syntax
diag ping | ping6 <IP Address or Name> [<parameters>]
Parameters
count <Number Of Times To Ping>
packetsize <Size In Bytes>
ethport <1|2>
Defaults
count:5
packetsize:64
Description
Verifies if the SLC console manager can reach a host over the network.
diag perfstat
Syntax
diag perfstat [ethport <1|2>] [deviceport <Device Port # or Name>]
Note: You must specify an Ethernet Port or Device Port.
SLC™ Console Manager User Guide
15: Command Reference
228