Host List Commands; Scripts - Lantronix SLC8 Manager User Manual

2. Click View Host Lists button. The parameters display in the Host List Parameters section.
3. Click the Edit Host List button. A new window opens and when the changes are complete,
the message "Host List configuration is complete." displays.
4. After the process completes, you can click the Host Lists tab.
To delete a host list:
1. Select the host list in the Host Lists table.
2. Click the Delete Host List button. A new window opens to confirm the deletion. When the
deletion completes, the message "Host List configuration is complete." displays.
3. After the process completes, you can click the Host Lists tab.
To view or update a host list:
1. In the Host Lists table, select the host list and click the View Host List button.

Host List Commands

The following CLI commands correspond to the Host Lists page. For more information, see
Command Reference.
set hostlist (name) (on page 231)

set hostlist (number) (on page 231)

set hostlist edit (on page 232)

set hostlist delete (on page 231)

show hostlist (on page 232)


Scripts

The SLC console manager supports the following two types of scripts:
Interface Scripts which use a subset of the Expect/Tcl scripting language to perform pattern

detection and action generation on Device Port output. For a description of the syntax allowed
in Interface Scripts, see
Batch Scripts which are a series of CLI commands. A user can create scripts at the web, view

scripts at the web and the CLI, and use scripts at the CLI. For a description of the syntax
allowed in Batch Scripts, see
All scripts have associated permissions. A user who runs a script must have the permissions
associated with the script in order to run it.
To add a script:
1. Click the Devices tab and select the Scripts option.
SLC™ Console Manager User Guide
Interface Script Syntax on page
Batch Script Syntax on page
108.
108.
Figure 8-11 shows the page that displays.
8: Devices
15:
105