Lantronix
SDSTX3110-124-LRT-B User Guide
4.5 Configuration by SSH Console
4.5.1 Connect to SSH Console
You can use an SSH tool such as PuTTY to access the SSH console of the device.
The PuTTY settings are: Serial line to connect to: COM1, Speed (baud): 9600, Data bits: 8, Stop bits: 1,
Parity: None, Flow control: XON/XOFF. Click the Open button to start. Note that PuTTY startup may take around
20 seconds.
The initial SSH console interface is shown below.
login as:
root
root@192.168.1.77's password:
root
*****************************************
*** Lantronix Industrial Serial Device Server Commander ***
*****************************************
-----------------------------------------
1. Overview
2. General Settings
3. Network Settings
4. Ports settings
5. Security(Accessible IP) Settings
6. Notification(Auto Warning) Settings
C. Change Password
L. Load Factory Default
S. Save configuration
R. Reboot
Q. Exit & Logout
Select one function (0-9,A,C,L,S,R,Q):
33686 Rev. C
https://www.lantronix.com/
68